Prof. Yuval[Yuval Cohen] Cohen

מחלקה להנדסת תעשיה מורה מן החוץ
Prof. Yuval[Yuval Cohen] Cohen
External phone: 054-5398152
Office: Wolfson - Engineering

Professor Yuval Cohen

Yuval Cohen is a senior faculty member at the Industrial Engineering Department of the Tel-Aviv Afeka College of Engineering. Previously, he was the head of the Industrial Engineering Program at the Open University of Israel. His areas of expertise are planning and operation of assembly lines, design and management of production and logistic systems, project management, supply chain management, and business decision making. He has published many papers in these areas.

Dr. Cohen served several years as a senior operations planner at FedEx Ground (USA)

and received several awards for his contributions to the hub and terminal network planning. Dr. Cohen received his PhD from the University of Pittsburgh (USA), his MSc from the Technion—Israel Institute of Technology, and BSc from Ben-Gurion University. Dr. Cohen is a fellow of the Institute of Industrial Engineers (IIE), and a full member of the Institute for Operations Research and Management Sciences (INFORMS).

 

RESUME - CV

Name: Prof. Yuval Cohen

Born:  Israel

Citizenship:  Israel

Address: Hatavas 7/3, POB 2401, Kadima 60920.       

ORCID 0000-0002-8225-6960 (https://orcid.org/0000-0002-8225-6960)

Phone & Cell Phone:  0545398152

  1. Academic Education
  2.  
 

Title

Institute (City)

Department

1985-89

B.Sc.

Ben-Gurion (Be'er-sheva)

Industrial Engineering

1990-92

M.Sc.

Technion (Hifa)

Industrial Engineering

1992-97

Ph.D.

University of Pittsburgh (USA)

Industrial Engineering

 

 

Degree

Supervisor

Title of Thesis

M.Sc.

Prof. Ezey Dar-El.

Optimizing the makespan in assembly lines under learning

Ph.D.

Prof. Bopaya Bidanda

A new modeling technique for discrete industrial control

  1. Academic and Industrial Employment

Start with most recent employment

 

Years

Employer (Location)

Subject

2014-Current

Afeka Academic College of Engineering

Since 2019:

100% Associate Professor (Industrial Engineering)

Previously: 100% Senior Lecturer (Ind. Eng.)

2008-2013

Open University

100% Senior lecturer  (Industrial Engineering)

2008-2013

Afeka…

50% Senior Lecturer  (Industrial Engineering)

2001-2008

Open University

100% Lecturer  (Industrial Engineering)

2002-2008

Holon Institute of Technology

50% Lecturer  (Industrial Management)

1998-2001

FedEx Ground (USA)

Senior operations researcher at FedEx Ground headquarters Pittsburgh PA, USA.

 

Membership in Professional Societies

1998-Current

Institue for Opertions Research and Management Scince (INFORMS)

1998- Current

Institute of Industrial & System Engineering (IISE)

2002-current

Operations Research Society of Israel (ORSIS)

 

  1. Academic Activities

Editorship

2019: Associate Editor, Journal of Intelligent Manufacturing (JIMS), ISSN: 0956-5515 (Print) 1572-8145 (Online). (H:74 , Impact factor: 5,  Q1)

2019-2020: Journal of Intelligent Manufacturing (JIM), Guest-Editor of a Special Issue: Intelligent Manufacturing Systems in Industry 4.0.

2019: International Journal of Advanced Manufacturing Technology (IJAMT), Guest-Editor of a Special Issue: Design and management of digital manufacturing and assembly systems in the Industry 4.0 era

2017: Book Editor: Handbook of Research on Strategic Alliances and Value Co-Creation in the Service Industry, Harrisburg: PA, IGI Global. (in English, ISBN-13: 978-1522520849).

2015 - Assembly Automation (AA): Guest-Editor of a Special Issue: Volume 35, Issue 1: Special Issue on: Parts-feeding systems for assembly: micro and macro logistics. Emerald Publishing Company.

 

Present Research and Development Activities

2021 – Session chair and proceedings Associate editor – INCOM 2021: 17th IFAC Symposium on Information Control Problems in Manufacturing, Budapest, Hungary.

2021 – Organizing committee member – ICIL 2021: 5th International Conference on Industrial Logistics , Zakopane, Poland

2008-Current: Member of the Industrial Engineering teaching and curriculum committee at Afeka College of Engineering – responsible for the courses in “Operations Management” discipline.

2017 – Current:  Vice chair of IFAC TC-5.1 committee (Plant Control and Industrial Logistics)  of the International Federation of Automatic Control (IFAC).

2018-Current, Editorial Board Member, Mathematics and Computer Science,  ISSN Print: 2575-6036

2018 - (Afeka: December 20) Initiating and organizing a conference on Quality Management (at Afeka Tel-Aviv academic college of engineering)

2018 – Organization of the International Conference on Industrial Logistics ICIL-2018.

 

Conference Session Chair and Co-Chair

2019: 9th IFAC/IFIP/IFORS/IISE/INFORMS Conference Manufacturing Modelling, Management and Control (MIM 2019), “Modeling design and operations of Industry 4.0 assembly systems: Towards Assembly 4.0”, Berlin, August 2019.

2019: Member in organizing committee: 13th IFAC Workshop on Intelligent Manufacturing Systems (IMS-2019), Oshawa, Ontario, Canada, 12-14 August 2019.

2019: 25th IJCIEOM - International Joint Conference on Industrial Engineering and Operations Management, Novi Sad, Serbia, July 15-17, 2019

2019: The 2019 Annual Conference of Operations Research Society of Israel (ORSIS), Shfaim, Israel, May 2019.

2019: The 20th Industrial Engineering and Management Conference (IEM); Tel-Aviv, Israel; Session: "Customer relationship management &knowledge management", (April 2019).

2018: 16th IFAC Symposium on Information Control Problems in Manufacturing (INCOM-2018); Bergamo Italy; Session: “Assembly 4.0” June 11-13,

2018: 14th International Conference on Industrial Logistics (ICIL 2018), Beer-Sheva, , Session: “Inventory Logistics”, May 15-17, 2018.

2017: 20th IFAC World Congress, Toulouse: France. Session: “Assembly 4.0”,  July 2017.

2017: The International Joint Conference ICIEOM-ADINGOR-IISE-AIM-ASEM (IJC2017), Valencia: Spain. Session: “Optimization” , July 2017.

2015: The 24th Industrial Engineering Research Conference (IERC); Nashville, TN; Session: “Project Management”, (June, 2015).

2015: The 19th Industrial Engineering and Management Conference (IEM); Tel-Aviv, Israel; Session: "Project Management", (February 2015).

2014: The 18th Industrial Engineering and Management Conference (IEM); Tel-Aviv, Israel; Session: "Project Management", (March 2014).

2013: 22nd International Conference on Production Research (ICPR 22), Iguassu Falls, Brazil, Session on "Production Systems and Management 14", (July 2013).

2013: IAFC Conference on Manufacturing Modeling and Control (MIM), Saint Petersburg, Russia, Session: "Balancing and Sequencing of Assembly and Machining Lines", (June, 2013).

2012: The International workshop on Applied Probability 2012 (IWAP); Jerusalem, Israel; Session: "Extreme Value Statistics", (June 2012).

2012: The 14th IFAC Symposium on Information Control Problems in  Manufacturing (INCOM); Bucharest, Romania; Session: "Combinatorial design of reconfigurable production lines", (May 2012).

2012: The 17th Industrial Engineering and Management Conference (IEM); Tel-Aviv, Israel; Session: "Assembly Line Design", (March 2012).

2011: International Conference on Production Research (ICPR 21), Stuttgart, Germany, Session: Design Of Assembly Systems, (August, 2011).

2010The 19th Industrial Engineering Research Conference (IERC); Cancun, Mexico; Session-1: Assembly line design and balancing, Session-2: Planning for Assembly Lines Dynamics, (June, 2010).

2010: International Symposium on Stochastic Models in Reliability Engineering, Life Sciences  and Operations Research (SMRLO), Beer-Sheva, (February 2010).

2009: The 20th International Conference of Production Research (ICPR-20), Shanghai, China, Session: Special memory session for Dar-El (August 2009).

2009: The 18th Industrial Engineering Research Conference (IERC); Vancouver, Canada; Session: Production & Mfg. Planning (May 2009).

 

Previous Research and Development Activities

2001-2013: Head – Industrial Engineering program at the Open University (IL), developed the curriculum and the study materials for several courses.

2012-2013; Editorial board member, International Journal of BRIC Business Research (IJBBR).

2008-2013; Evaluate manuscripts; International Journal of Information & Decision Sciences (IJIDS). Listed in the Cabell's Directory (11th Edition) of Refereed Publications, and indexed in Science Direct.

2008-2013; Evaluate manuscripts; International Journal of Information Technology Project Management (IJITPM). Indexed by Cabell's Directory of Refereed Publications (11th Edition).

2009-2013; Editorial board member, International Journal of Managing Information Technology (IJMIT)

2014 – (Afeka: Nov. 19) Convention of Lecturers and Researchers in Project management.

2015 – (Afeka: March 11) Initiating and organizing a conference on Quality Management (at Afeka Tel-Aviv academic college of engineering)

2016-: Editorial board member, International Journal of ICT Research in Africa and the Middle East (IJICTRAME).

2016 - (Afeka: January 20) Initiating and organizing a conference on Quality Management (at Afeka Tel-Aviv academic college of engineering)

- (Afeka, March 17) Initiating and organizing a conference on Project Management (at Afeka Tel-Aviv academic college of engineering)

2018 - (Afeka: March 19) Initiating and organizing a conference on Quality Management (at Afeka Tel-Aviv academic college of engineering)

 

 

Supervision Students for an Academic High Degree

 

Years

Name of Student

Title

Institution

Title of Thesis

2017-Current

Anat Karkowski

M.Sc

Bar-Ilan University, Management & Logistics

Multi Project Selection

2013-2018

Ran Etgar

Ph.D.

Bar-Ilan University, Business Administration

Version Release Optimization

2016

Dov Hofman

M.Sc

Afeka College of Engineering, Infrastructure Engineering and Management

Smart mobility: Private Rapid Transit in Tel-Aviv Metropolitan area.

2016

Elad Peleg

M.Sc.

Afeka College of Engineering, Service Engineering and Management

Home Care improvement by reorganization

2015-2016

Sapir Farid

M.Sc.

Afeka College of Engineering, Service Engineering and Management

Load Analysis for Staffing Decisions in Call Centers

2012-2013

Sasha Meltser

M.Sc.

The Open University of Israel, Computer Science

Genetic Algorithms comparisons for Mixed Model U-Line Balancing

2012

Marina Embon

M.Sc.

Holon Institute of Technology, Technology Management

Using the Chinese Postman technique for solving the Traveling Salesman Problem (TSP)

2010

Miri Kedmi

M.Sc.

Holon Institute of Technology, Technology Management

Comparison of altrernative CRM systems for “YES” corp.

2009

Alon Avgill,

M..Sc.

Holon Institute of Technology, Technology Management

Dynamic algorithm for quality control of GreenRoad control devices

 

See 5.3. Conference Proceedings for Participation in Professional Conferences

 

  1. Grants and Awards

Awards

2008-2013: Open University outstanding excellence award.

2008: Afeka: Excellent lecturer award.

2014: Afeka: Excellent lecturer award.

2014: Afeka: Excellent researcher award

2015: Afeka: Excellent lecturer award.

2016: Afeka: Excellent lecturer award. Excellent researcher award

2017: Afeka: Excellent lecturer award. Excellent researcher award

2018: Afeka: Excellent researcher award

 

2019: Afeka: Excellent researcher award

 

 

Grants

1993; American National Standards Institute (ANSI); Technology evaluation of two-dimensional bar-code symbologies; $50,000.

1994-1995; Benjamin Franklin Foundation, Maynard Co.; TalkMOST system¾an intelligent voice-activated work-measurement system; $60,000.

2003; Open University - Active Research Fund, Learning in Inventory Acquisition Decisions, $2,000.

2004; Eshkol Local Governance fund sponsored by "Mifal HaPais" "Developing Operating Measures for Municipality of Shoham" 50,000 IS.

2005; Open University - "Gishush" Research Fund, Inventory Acquisition Decisions, $8,000.

2007; Open University - Research Fund, Project scheduling,  30,000 IS.

2010; Open University - Research Fund, Decision making under uncertainty,  30,000 IS.

2012; Ben Gurion University – Research Fund, Developing a methodology to analyze the population resilience in real time, 200,000 IS.

2016; Transportation Ministry: Feasibility Study of an Urban Elevated Transportation System 500,000 IS

 

 

  1. List of Publications

 

5.1 Peer reviewed papers

  1. Cohen, Y., Faccio, M., Pilati, F. (2019) Design and management of digital manufacturing and assembly systems in the Industry 4.0 era, International Journal of Advanced Manufacturing Technology (IJAMT), 105, 3565–3577 2019. https://doi.org/10.1007/s00170-019-04595-0
  2. Cohen, Y., Naseraldin, H., Chaudhuri, A., & Pilati, F. (2019). Assembly systems in Industry 4.0 era: a road map to understand Assembly 4.0. The International Journal of Advanced Manufacturing Technology(IJAMT),  105(9), 4037-4054. https://doi.org/10.1007/s00170-019-04203-1
  3. Maya Golan, Yuval Cohen & Gonen Singer (2020) A framework for operator –  workstation interaction in Industry 4.0, International Journal of Production Research, (IJPR),  58 (8), 2421-2432, DOI: 10.1080/00207543.2019.1639842
  4. Erel Avineri and Yuval Cohen, Optimal road project portfolio selection problem with local budget constraints, Journal of Business and Economic Management 7(11): 369-375, November 2019, DOI: 10.15413/jbem.2019.0126, ISSN 2315-7755 ©2019 Academia Publishing. https://www.academiapublishing.org/journals/jbem/pdf/2019/Nov/Avineri%20and%20Cohen.pdf
  5. Cohen Y., Gelbard R., Amorim M. (2019) When to Stop? A New Stop Criterion for Combinatorial Optimization Search Techniques. 211-218.  In: Ortiz Á., Andrés Romano C., Poler R., García-Sabater JP. (eds) Engineering Digital Transformation. Lecture Notes in Management and Industrial Engineering. Springer, Cham, Print ISBN 978-3-319-96004-3, DOI https://doi.org/10.1007/978-3-319-96005-0_26
  6. Cohen Y., Rozenes S. ,Demand biorhythm estimation for setting service capacity, International Journal of Information Systems and Social Change, 9 (4), 2018, 30-44.
  7. Weintraub E., Cohen Y., Defining Network Exposure Metrics in Security Risk Scoring Models, International Journal of Advanced Computer Science and Applications (IJACSA), 9, (4), 2018, 399-404.
  8. Etgar, R., Gelbard, R., & Cohen, Y. (2018). Feature assignment in multi-release work plan: Accelerating optimization using gene clustering. Computers & Industrial Engineering(CAIE), 118, 123-137.
  9. Etgar R. Gelbard R. Cohen Y., Presenting the several-release-problem and its cluster based solution acceleration. International Journal of Production Research (IJPR), 2018, in press.
  10. Cohen Y., Rozenes S., Improving operational measures in a financial institute call center: a case study, Brazilian Journal of Operations & Production Management, 14, (2) 2018, 204-209.
  11. Etgar R., Gelbard R., Cohen Y. Optimizing Version Release Dates of Research and Development Long-Term Processes, European Journal of Operational Research (EJOR), 259(2), 2017, 642-653.
  12. Weintraub E., Cohen Y., Optimizing Cloud Computing Costs of Services for Consumers, In: Khosrow-Pour M., Encyclopedia of Information Science and Technology. 4th edition, 2017. 1627-1637.
  13. Cohen Y., Rozenes S., Optimizing Group Waiting Time in Service System with Learning Effect, International Journal of Business Analytics (IJBAN), 4 (1) 2017, 18-35.
  14. Weintraub E. and Yuval Cohen Y., Security Risk Assessment of Cloud Computing Services in a Networked Environment” International Journal of Advanced Computer Science and Applications (IJACSA), 7(11), 2016, 79-90.
  15. Ren, C., Barlotti, C., Cohen, Y., Frangipane, B., Garofalo, M., Cozzari, G., Metz, C. Re-layout of an assembly area: A case study at Bosch Rexroth Oil Control, (2015) Assembly Automation (AA), 35 (1), pp. 94-103.
  16. Weintraub E., Cohen Y., Optimizing User's utility from Cloud Computing Services in a Networked Environment, International Journal of Advanced Computer Science and Applications (IJACSA),. 6, (10), 2015, 153-163.
  17. Weintraub E., Cohen Y., Cost Optimization of Cloud Computing Services in a Networked Environment, International Journal of Advanced Computer Science and Applications (IJACSA),.  6 (4), 2015, 148-157.
  18. Faccio M., Cohen Y., "Editorial", Assembly Automation (AA), 35 (1), 2015. https://doi.org/10.1108/AA-10-2014-084
  19. Ren, C., Barlotti, C., Cohen, Y., Frangipane, B., Garofalo, M., Cozzari, G. and Metz, C.), "Re-layout of an assembly area: a case study at Bosch Rexroth Oil Control", Assembly Automation (AA), 35 (1), 2015.  94-103. https://doi.org/10.1108/AA-06-2014-052
  20. Cohen Y., A Technique for Integrated Modelling of Manual and Automatic Assembly, Journal of Manufacturing Technology Management (JMTM), 24 (3), 2015, 164-181.
  21. Gurevich G., Cohen Y., Keren B., Optimizing bundling policy of single-period products: perspectives of producers and retailers, International Journal of Operations Research and Information Systems (IJORIS), 5 (4), 2014, 1-25.
  22. Shavit T., Benzion U., Cohen Y., Behavioral decision making in the (Q,R) purchasing model: An experimental study, Managerial and Decision Economics, 35 (5) 2014, 357–370.
  23. Singer G., Golan M., Cohen Y., From product documentation to a ‘method prototype’ and standard times: a new technique for complex manual assembly, International Journal of Production Research (IJPR), 52 (2), 2014, 507-520.
  24. Apartsin Y., MaymonY., CohenY., Singer G., Nationality and Risk Attitude : Testing Differences and Similarities of Investors’ Behavior in Selected Financial Markets, Global Finance Journal (GFJ), 24 (2), 2013, 114-118.
  25. Bukchin Y., Cohen Y., Minimizing throughput loss in assembly lines due to absenteeism and turnover via work-sharing, International Journal of Production Research (IJPR), 51 (20), 2013, 6140–6151
  26. Cohen Y., Ornoy H., and Keren B., MBTI Personality Types of Project Managers and their Success: A Field Survey, Project Management Journal (PMJ), 44, (3), 2013, 78-87.
  27. Cohen Y., Assembly line segmentation: determining the number of stations per section, Journal of Manufacturing Technology Management (JMTM), 24 (3), 2013, 397 – 412.
  28. Cohen Y., Absenteeism as a Major Cause of Bottlenecks in Assembly Lines, International Journal of Production Research (IJPR), 50 (21), 2012, 6072-6080.
  29. Cohen Y., Sadeh A., Zwikael O., Finding the Shortest Non-Delay Schedule for a Resource-Constrained Project, International Journal of Operations Research and Information Systems (IJORIS), 3 (4), 2012, 41-58
  30. Weintraub E., and Cohen Y.; Business IT divide problem pertaining to planning and budgeting activities, Advances in Computer Science and Engineering, 8 (2), 2012, 85-109.
  31. Keren B., and Cohen Y.; Optimising Project Performance: The Triangular Trade-off Optimisation Approach, International Journal of Engineering Management and Economics (IJEME), 3 (1), 2012, 152-170.
  32. Cohen Y., Zwikael O., and Sadeh A.; Using a sliding-frame approach for scheduling large and complex IT projects, International Journal of Information Technology Project Management (IJITPM), 2 (4), 2011, 1-13.
  33. Cohen Y., A New Modeling and Implementation Technique for Agent-Based Discrete Industrial Automation, Journal of Communication and Computer; 8 (1); 2011, 1-7.
  34. Cohen Y., Zwikael O., A New Technique for Estimating the Distribution of a Stochastic Project Makespan, International Journal of Information Technology Project Management (IJITPM), 1(3), July-September 2010, 14-27.
  35. Benzion U., Cohen Y., Shavit T., The newsvendor problem with unknown distribution, Journal of Operational Research Society (JORS), 61; 2010; 1022-1031.
  36. Cohen Y., Mining the successful binary combinations: Methodology and a simple case study, International Journal of Computer Science Issues (IJCSI), 7(1), 2010; 1-9.
  37. Cohen Y., and Dar-El E.; The sliding frame - extending the concept to various assembly line balancing problems, International Journal of Manufacturing Technology and Management (IJMTM); 20 (1/2/3/4); 2010; 4-24.
  38. Cohen Y., Wang M. E., and Bidanda B.; Automatic translation of process level Petri-net to a ladder diagram, Journal of Communication and Computer; 6 (11); 2009, 58-64.
  39. Cohen Y., and Keren B.; Trailer to door assignment in a synchronous cross-dock operation, International Journal of Logistics Systems and Management (IJLSM); 5, (5); 2009; 574-590.
  40. Cohen Y. and Zwikael O.; Modelling and Scheduling Projects Using Petri Networks; International Journal of Project Organization and Management (IJPOM); 1 (2); 2009; 221-233.
  41. Prakash, A., Khilwani, N., Tiwari, M.K., Cohen, Y.; Modified immune algorithm for job selection and operation allocation problem in flexible manufacturing systems, Advances in Engineering Software, 39 (3), 2008, 219 – 232.
  42. Benzion U., Cohen Y., Peled R., and Shavit T.; Decision-making and the newsvendor problem: an experimental study, Journal of the Operational Research Society (JORS); 59 (9); 2008; 1281-1287.
  43. Cohen Y., Dar-El E., Vitner G., and Sarin S.; Optimal layout and work allocation in batch Assembly under learning effect, International Journal for Intelligent Systems Technologies and Applications (IJISTA); 4 (1-2); 2008; 188-207.
  44. Cohen Y., Dar-El E., Vitner G., and Sarin S.; Work allocation to stations in a line with unlimited buffers for three general learning patterns, International Journal for Intelligent  Systems Technologies and Applications (IJISTA); 4 (1-2); 2008; 123-140.
  45. Cohen Y., Vitner G., and Sarin S.; Work allocation to stations with varying learning slopes and without buffers, European Journal of Operational Research (EJOR); 184 (2); (January 2008); 797-801.
  46. Cohen Y., Sadeh A., and Ben-David A.; A new approach for decision rule extraction from binary data, Journal of Engineering, Computing and Architecture (ISSN 1934-7197); 1(2); 2007; 1-10.
  47. Cohen Y., and Sadeh A.; A new approach for constructing and generating AOA networks, Journal of Engineering, Computing and Architecture (ISSN 1934-7197); 1 (1); 2006; 1-15.
  48. Zwikael O., Cohen Y., And Sadeh A.; Non-Delay scheduling as a managerial approach for managing projects, International Journal of Project Management (IJPM); 24; 2006; 330-336.
  49. Cohen Y., Vitner G., and Sarin S.; Optimal allocation of work in assembly lines for lots with homogeneous learning, European Journal of Operational Research (EJOR), Special issue on line balancing; 168 (3); 2006; 922-931.
  50. Cohen Y. and Dar-El E. M.; Optimizing the number of stations in assembly lines under learning, Production Planning and Control; 9 (3); 1998; 230-240.
  51. Cohen Y., Bidanda B., and Billo E. R.; Accelerating the generation of work-measurement standards through automatic speech recognition: A laboratory study, International Journal of Production Research (IJPR); 36 (10); 1998; 2701-2715.
  52. Billo E. R., Bidanda B., Cohen Y., Fei C., and Petri K.; Performance standards and testing of two-dimensional bar-code systems for overhead scanning, Journal of Manufacturing Systems (JOMS); 15 (5); 1996; 305-315.

 

 

  1.  Books
  1. Shtub A., Cohen Y., (2016) Introduction to Industrial Engineering, Second Edition, CRC Press, (in English, ISBN 9781498706018). BOOK OF THE YEAR AWARD by the Institute for Industrial and systems Engineering (IISE).
  2. Rozenes S., Cohen Y., (editors), (2017) Handbook of Research on Strategic Alliances and Value Co-Creation in the Service Industry, Harrisburg: PA, IGI Global. (in English, ISBN-13: 978-1522520849).
  3. Shtub A., Cohen Y., (2014) Project Management for Industrial Engineering Students (revised edition), The Open University of Israel, (in Hebrew, two volumes).
  4. Shtub A., Cohen Y., (2014) Introduction to Industrial Engineering, (First Edition), The Open University of Israel, (in Hebrew).
  5. Cohen Y. (2012) Probability and Stochastic Models in Operations Research, The Open University of Israel, ISBN: 978-965-06-1365-5 (in Hebrew: 474 pages).
  6. Shtub A., Cohen Y., Keren B., (2008) Project Management for Industrial Engineering Students, The Open University of Israel, ISBN: 978-965-06-0963-4 (in Hebrew: 612 pages).

 

Book Professional and scientific editor for the translation to Hebrew of the two volumes of "Production and Operations Analysis". The translation is the basis of two courses in the Open University:

  1. Nahmias S. (2008) Operations Management 1 (in Hebrew), The Open University of Israel, ISBN: 965-06-0712-9;
  2. Nahmias S. (2008) Operations Management 2 (in Hebrew), The Open University of Israel, ISBN: 965-06-0787-0.

 

  1. Book Chapters
  1. Reis J., Amorim M., Cohen Y., Rodrigues M. (2020) Artificial Intelligence in Service Delivery Systems: A Systematic Literature Review. In: Rocha Á., Adeli H., Reis L., Costanzo S., Orovic I., Moreira F. (eds) Trends and Innovations in Information Systems and Technologies. WorldCIST 2020. Advances in Intelligent Systems and Computing, vol 1159. Springer, Cham, pp  222-233.
  2. Reis J., Amorim M., Melão N., Cohen Y., Rodrigues M. (2020) Digitalization: A Literature Review and Research Agenda. In: Anisic Z., Lalic B., Gracanin D. (eds) Proceedings on 25th International Joint Conference on Industrial Engineering and Operations Management - IJCIEOM. IJCIEOM 2019. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Cham, pp 443-456. https://link.springer.com/chapter/10.1007%2F978-3-030-43616-2_47
  3. Cohen, Y., Gelbard, R., & Amorim, M. (2019). When to Stop? A New Stop Criterion for Combinatorial Optimization Search Techniques. In Engineering Digital Transformation (pp. 211-218). Springer, Cham. (https://link.springer.com/chapter/10.1007/978-3-319-96005-0_26)
  4. Weintraub, E., & Cohen, Y. (2018). Optimizing Cloud Computing Costs of Services for Consumers. In: Encyclopedia of Information Science and Technology, Fourth Edition (pp. 1627-1637). IGI Global. (https://www.igi-global.com/chapter/optimizing-cloud-computing-costs-of-services-for-consumers/217284)
  5. Cohen Y., Rozenes S., (2017).Value Co-Creation Approach for Improving Performance of Outsourced Projects, chapter 9, 172-183. In: Cohen Y., Rozenes S., (editors), Handbook of Research on Strategic Alliances and Value Co-Creation in the Service Industry, Harrisburg: PA, IGI Global..
  6. Cohen Y., Gonen S., Golan M., & Goren-Bar D., Chapter 8: Automating the transformation from a prototype to a method of assembly, Innovations and Advances in Computer Information Systems, Sciences, and Engineering, Part I, Springer, 2013, 99-106.
  7. Cohen, Y., Sadeh, A., & Zwikael, O. (2013). Scheduling Large and Complex IT Projects Using Sliding-Frame Approach. In Wang, J. (Ed.), Perspectives and Techniques for Improving Information Technology Project Management, IGI Global Chapter 12, 173-185.

DOI: https://www.igi-global.com/gateway/chapter/73234

  1. Cohen Y., & Goren-Bar D., New Automated Assembly Model Based on Automated Route Card Scheme, in: Elleithy K., Sobh T., Emerging Trends in Computing, Informatics, Systems Science and Engineering, Springer 2013, 95-102.
  2. Cohen Y., & Zwikael O.; A New Technique for Estimating the Distribution of a Stochastic Project Makespan, in Wang J., Project Management Techniques and Innovations in Information Technology, IGI Global, 33-47, 2012.
  3. Cohen Y., Wang M., and Bidanda B.; Transition Network for Automation Modeling: A Case Study, in: Elleithy K., Sobh T., Iskander M. Kapila V. Karim M., Mahmood A. (editors), Technological Developments in Networking, Education and Automation; Springer; 2010; 187-192.
  4. Cohen Y., Wang M., and Bidanda B.; Automatic translation of a process level Petri-net to a ladder-diagram, in: Sobh T., Elleithy K., Mahmood A., Karim M. (editors), Advanced Techniques in computing Sciences and Software Engineering; Springer; 2010; 25-31.
  5. Cohen Y.; A modeling technique for execution and simulation of discrete automation, , in: Sobh T., Elleithy K., Mahmood A., Karim M. (editors), Novel algorithms and techniques in telecommunications, automation and industrial electronics; Springer; 2008; 273-278.
  6. Cohen Y., Wang M., and Bidanda B.; Modeling and implementation of agent-based discrete industrial automation, in: Sobh T., Elleithy K., Mahmood A., Karim M. (editors), Innovative algorithms and techniques in automation, industrial electronics and telecommunications; Springer; 2007; 535-541.

 

 

 

  1. Papers and Abstracts - Proceedings of Conferences

Names of authors, Title, Conference information. Present only information on the most recent 20 abstracts.

International Meetings

  1. Cohen Y. and Shoval S., New Cobot Deployment Strategy in Manual Assembly Stations: Countering the Impact of Absenteeism, Proceeding of the IFAC World Congress, Berlin (July 2020).
  2. Cohen, Y., Faccio, M., & Elaluf, A. (2019). Hierarchy of Smart Awareness in Assembly 4.0 Systems. IFAC-PapersOnLine, 52(13), 1508-1512.
  3. Cohen, Y., Shoval, S., & Faccio, M. (2019). Strategic View on Cobot Deployment in Assembly 4.0 Systems. IFAC-PapersOnLine, 52(13), 1519-1524.
  4. Marlene Amorim, Yuval Cohen, Joao Reis, Mario Rodrigues, (December 2019). Exploring Opportunities for Artificial Emotional Intelligence in Service Production Sytems, IFAC PapersOnLine 52-13, 1145-1149.
  5. Cohen Y., Reis J., Amorim M., Empirical Analysis of Call Center Load & Service Level for Shift Planning, In: Proceedings of the International Conference on Exploring Service Science, IESS 2020, Porto: Portugal:.  80-91, Springer, February 2020.
  6. Cohen Y., Faccio M., Elaluf A., Hierarchy of Smart Awareness in Assembly 4.0 Systems, 9th IFAC/IFIP/IFORS/IISE/INFORMS Conference, Manufacturing Modelling, Management and Control (MIM 2019), Berlin Germany, August 27-30, 2019.
  7. Cohen Y., Shoval S., Faccio M., Strategic View on Cobot Deployment in Assembly 4.0 Systems, IFAC PapersOnLine 52-13 (2019) 1519–1524.
  8. 9th IFAC/IFIP/IFORS/IISE/INFORMS Conference, Manufacturing Modelling, Management and Control (MIM 2019), Berlin Germany, August 27-30, 2019.
  9. Amorim M., Cohen Y., Reis J., Rodrigues M., Exploring Opportunities for Artificial Emotional Intelligence in Service Production Systems, 9th IFAC/IFIP/IFORS/IISE/INFORMS Conference, Manufacturing Modelling, Management and Control (MIM 2019), Berlin Germany, August 27-30, 2019.
  10. Cohen Y., Amorim M., Reis J., Rodrigues M., Frontline Employees Preferences for Interfacing Service 4.0 Artificial Emotional Intelligence Computerized Agent , 25th IJCIEOM - International Joint Conference on Industrial Engineering and Operations Management, Novi Sad, Serbia, July 15-17, 2019
  11. Cohen Y., Amorim M., Reis J., Rodrigues M., Enabling Digital Technologies for Service 4.0: A Literature Review Leading to Operator Assistance Framework, 25th IJCIEOM - International Joint Conference on Industrial Engineering and Operations Management, Novi Sad, Serbia, July 15-17, 2019
  12. Cohen Y., Amorim M., The impact of task time randomness on optimizing a multi-release planning, and assembly line balancing, 25th IJCIEOM - International Joint Conference on Industrial Engineering and Operations Management,  (IJC2018), Lisbon: Portugal. July 2018.
  13. Cohen Y. Gelbard R. Amorim M., When to Stop? A New Stop Criterion for Combinatorial Optimization Search Techniques", ECCO XXXI - CO 2018 Joint Conference, Fribourg, Switzerland. June 2018.
  14. Cohen Y, Golan M, Singer G, Faccio M.; Workstation‒Operator Interaction in 4.0 Era: WOI 4.0; 16th IFAC Symposium on Information Control Problems in Manufacturing (INCOM-2018); Bergamo Italy; Session: “MoAT5 - Assembly System 4.0”; June 2018.
  15. Cohen Y., Retailer's Optimal Purchase Mix of Bundles and Separate Products in a Supply-Chain of Single Period Items, 14th International Conference on Industrial Logistics (ICIL 2018), Beer-Sheva, May 15-17, 2018.
  16. Etgar R., Gelbard R., Cohen Y., Scheduling on-going research and development projects, Proceedings of the 14th International Conference on Industrial Logistics (ICIL 2018), Beer-Sheva, May 15-17, 2018. (ISBN 978-965-572-573-5)
  17. Avineri E., Cohen Y. Optimal road project portfolio selection under limited local authorities budgets in polynomial time, Proceedings of the 14th International Conference on Industrial Logistics (ICIL 2018), Beer-Sheva, May 15-17, 2018. (ISBN 978-965-572-573-5)
  18. Weintraub E., Cohen Y., Adding Network Exposure to Environmental Measures in Security Risk Scoring Models, 17th Annual Security Conference Securing the interconnected world, Las-Vegas: USA, March 26-28, 2018.
  19. Cohen Y., Faccio M., Mora C. Galizia F. G., Pilati F. Assembly system configuration through Industry 4.0 principles: the expected change in the actual paradigms, 20th IFAC World Congress, Toulouse: France. July 2017.  IFAC PapersOnLine, 50-1 (2017) pp. 14958–14963.
  20. Cohen Y. Gelbard R. Amorim M., When to Stop? A New Stop Criterion for Combinatorial Optimization Search Techniques" The International Joint Conference ICIEOM-ADINGOR-IISE-AIM-ASEM (IJC2017), Valencia: Spain. July 2017.
  21. Cohen Y., Avineri E., Hoffman D., Framework for Personal Rapid Transit Feasibility studies, Production and Operations Management Society International Conference (POMS International conference), Tel-Aviv June 27 – 29, 2017.
  22. Cohen Y., Formulating Polynomial Time Solutions to Certain Combinatorial Problems, Annual Conference of the Institute of Industrial and Systems Engineering (IISE). Pittsburgh PA: USA. May 2017.
  23. Cohen Y., Rozenes S., Efrat P., Maya G., Common Service Demand Pattern for Service Capacity Planning, Annual Conference of the Institute of Industrial and Systems Engineering (IISE). Pittsburgh PA: USA. May 2017.
  24. Zagorie R., Rozenes S., Cohen Y., Customer Satisfaction from Inner-City Services: a Case Study. In: International Conference on Exploring Service Science (IESS), Rome: Italy, May 2017.
  25. Etgar R., Gelbard R., Cohen Y. Project Scope Partitioning by Clustering Features into Releases of Long R&D Projects, Procedia Computer Science, Volume 100, , Pages 1235-1241, 2016.
  26. Cohen Y., Rozenes, S., Golan M., Perel E., Common service demand pattern for service capacity planning, , XXII International Conference on Industrial Engineering and Operations Management, International IISE Conference 2016, San-Sebastian, Spain. July, 2016.
  27. Cohen, Y., Rozenes, S., & Faccio, M. Modelling a manager’s work as a service activity. Bucharest: Romania, May 2016. In: Proceedings of the International Conference on Exploring Service Science, IESS 2016, Heidelberg: Springer.  384-391, 2016.
  28. Cohen Y. Rozenes S., Integrating Strategic Considerations and Value Co-Creation in Project Management,  XXI International Conference on Industrial Engineering and Operations Management, International IIE Conference 2015, Aveiro, Portugal. July 6-8, 2015.
  29. Cohen Y. Etgar R. Gelbard R., Managing Continuing Projects: Optimizing the Version-Release Policy, XXI International Conference on Industrial Engineering and Operations Management, International IIE Conference 2015, Aveiro, Portugal. July 6-8, 2015.
  30. Weintraub E., Cohen Y., Continuous Monitoring System Based on Systems' Environment, Proceedings of the Conference on Digital Forensics, Security and Law, Daytona Beach, Florida, USA, May 2015.
  31. Cohen Y.,  Gelbard R., Etgar R., Scheduling Continuous Projects with Version  Releases, Proceedings of the 24th Industrial & Systems Engineering Research Conference (ISERC); Nashville, USA; May 2015.
  32. Cohen Y.,  Rozenes S., Zwikael O., Dynamic Strategic Planning in Project Management: Optimizing Project's Value, Proceedings of the 24th Industrial & Systems Engineering Research Conference (ISERC); Nashville, USA; May 2015.
  33. Cohen Y., Apartsin Y., Service Oriented Acquisition Models for Serving Products with Short Expiration Period Series: Lecture Notes in Business Information Processing, Vol. 201, Springer. In: Sampaio da Nóvoa, Henriqueta, Dragoicea, Monica (Eds.), Proceedings, Exploring Services Science, 6th International Conference, IESS 2015, Porto, Portugal, February 4-6, 2015.
  34. Meltser A. Cohen Y., Avigal M., Conclusions from Comparing Genetic Algorithms for U-shaped Assembly Line Balancing, Proceedings of the 23th Industrial Engineering Research Conference (ISERC); Montreal, Canada; May 2014.
  35. Cohen Y., Etgar R., Gelbard R., Optimizing Planning and Scheduling Product/Software Releases using MPSO, Proceedings of the 23th Industrial Engineering Research Conference (ISERC); Montreal, Canada; May 2014.
  36. Cohen Y., Faccio M., Absenteeism/Turnover Analysis in Mixed-Model Assembly Lines, Proceedings of the 22nd International Conference on Production Research (ICPR 22), Iguassu Falls, Brazil, July 2013.
  37. Cohen Y., Bukchin Y., Optimizing Work-Sharing Assignments for Replacements of Absentees in Assembly Lines, Proceedings of the 22nd International Conference on Production Research (ICPR 22), Iguassu Falls, Brazil, July 2013.
  38. Cohen Y., Span of Control in Long Assembly Lines – Segmenting the Line, Proceedings of the 22nd International Conference on Production Research (ICPR 22), Iguassu Falls, Brazil, July 2013.
  39. Cohen Y., On Capacity Planning for Multi-Stage Multi Model Production Lines with Parallel Machines, Proceedings of the IAFC Conference on Manufacturing Modeling and Control (MIM), Saint Petersburg, Russia, June, 2013.
  40. Cohen Y., and Delorme X., Column Generation Approach for Planning the Operation of Reconfigurable Production Line Segments with Bidirectional Conveyance System, 14th IFAC Symposium on Information Control Problems in Manufacturing (INCOM-2012), Bucharest, Romania, May, 2012.
  41. Cohen Y., Singer G., Golan M., Goren-Bar D., Automating the Transformation From a Prototype to a Method of Assembly, Proceeding of the International Conference on Industrial Electronics, Technology and Automation (IETA 11), in IEEE's: Proceedings of the International Joint Conferences on Computer, Information, and Systems Sciences, and Engineering (CISSE); December 2011.
  42. Cohen Y., A route card modeling technique for complex assembly, 21st International Conference on Production Research (ICPR 21), Stuttgart, Germany, July 2011.
  43. Cohen Y., Zwikael O., Sadeh A.; Optimal Project Subsets Selection in Polynomial Time, Proceedings of the 20th Industrial Engineering Research Conference (IERC); Reno, NV, USA; May 2011.
  44. Cohen Y.; Assembly line design with shared machines, Proceedings of the 20th Industrial Engineering Research Conference (IERC); Reno, NV, USA; May 2011.
  45. Cohen Y. Goren-Bar D., New Automated Assembly Model Based On Automated Route Card Scheme, Proceeding of the International Conference on Industrial Electronics, Technology and Automation (IETA 10), in IEEE's: Proceedings of the International Joint Conferences on Computer, Information, and Systems Sciences, and Engineering (CISSE); December 2010.
  46. Cohen Y.; The Impact of Absenteeism and Turnover in Assembly Lines and Strategies for Overcoming Them, Proceedings of the Manufacturing and Service Operations Management Conference (MSOM 2010), Haifa, Israel; June 2010.
  47. Cohen Y.; A New Technique for Solving the Assembly Line Design Problem, Proceedings of the 19th Industrial Engineering Research Conference (IERC); Cancun, Mexico; May 2010.
  48. Cohen Y.; Optimizing Purchase Mix of Bundles and Separate Products in the Supply-Chain, Proceedings of the 19th Industrial Engineering Research Conference (IERC); Cancun, Mexico; May 2010.
  49. Cohen Y.; Planning for Assembly Lines Absenteeism and Turnover, Proceedings of the 19th Industrial Engineering Research Conference (IERC); Cancun, Mexico; May 2010.

 

 

 

 

 

Israeli Meetings

  1. Yuval Cohen, Causation analysis for improving quality, Tel-Aviv, 26-27 November 2019, The 37 convention of the Israel Society for  Quality.https://drive.google.com/file/d/1q_5KiSlPNP7Rq4MeRvPR_ntR0zH7x1E_/view
  2. Gonen Singer, Yuval Cohen, Smart control using adaptive machine learning for processes with closed-loop control in industry 4.0 environment: a novel framework, 9th Israeli Industrial Engineering and Management Research Conference; Technion: Haifa, Israel; February 2020.
  3. Ran Etgar, Erel Avineri, Yuval Cohen, Improving Personal Rapid Transportation system by utilizing smart distribution rules, Proceedings of the 2019 Annual Conference of Operations Research Society of Israel (ORSIS), May 2019.
  4. Yuval Cohen, Erel Avineri, Polynomial Time Optimization of Road Construction Portfolio Selection under Limited Local Authorities Budgets, Proceedings of the 2019 Annual Conference of Operations Research Society of Israel (ORSIS), May 2019.
  5. Erel Avineri,Yuval Cohen, Ran Etgar, Simulating Elevated Rapid Transit System for Performance Analysis, Proceedings of the 2019 Annual Conference of Operations Research Society of Israel (ORSIS), May 2019.
  6. Cohen Y., Etgar R., Optimizing Termination Criterion For Genetic Algorithms And Other Search Techniques Proceedings of the 20th Industrial Engineering and Management Conference (IEM); Tel-Aviv, Israel; April 2019.
  7. Cohen Y., Rozenes S., Faccio M., Determining Manager's Load and Control Span by Modeling Management as a Service Activity, Proceedings of the International Symposium on Stochastic Models in Reliability Engineering, Life Sciences  and Operations Research (SMRLO), Beer-Sheva, February 2016.
  8. Cohen Y., Zwikael O., New approach for managing strategic and mega projects. Proceedings of the 19th Industrial Engineering and Management Conference (IEM); Tel-Aviv, Israel; February 2015.
  9. Weintraub E. and Cohen Y., Optimizing cloud costs,  Proceedings of the 19th Industrial Engineering and Management Conference (IEM); Tel-Aviv, Israel; February 2015.
  10. Cohen Y., Etgar R., Determining the SOW of a continuing project releases. Proceedings of the 19th Industrial Engineering and Management Conference (IEM); Tel-Aviv, Israel; February 2015.
  11. Cohen Y., Apartsin Y., Retailer's Optimal Bundling Policy in a Supply-Chain of Single Period Items, Proceedings of the 18th Industrial Engineering and Management Conference (IEM); Tel-Aviv, Israel; March 2014.
  12. Cohen Y., Avigal M., Meltzer A., Comparison of Three Genetic Algorithms for Mixed Model U-shaped Assembly Line Balancing, Proceedings of the 18th Industrial Engineering and Management Conference (IEM); Tel-Aviv, Israel; March 2014.
  13. Cohen Y., Ornoy H., Keren B., MBTI Profiles of Project Managers and Project Success: A Survey, Proceedings of the 18th Industrial Engineering and Management Conference (IEM); Tel-Aviv, Israel; March 2014.
  14. Cohen Y., Gelbard R., Etgar R., Determining the SOW of Product Releases of a continuous Project, Proceedings of the 6th Israeli Industrial Engineering Research Meeting (IIERM); Maale-Hachmisha, Israel; March 2013.
  15. Cohen Y., Segmentation of an Assembly Line: Optimizing the Number of Stations per Segment, , Proceedings of the 6th Israeli Industrial Engineering Research Meeting (IIERM); Maale-Hachmisha, Israel; March 2013.
  16. Cohen Y., Record breaking statistics: implications for optimization search-techniques and risk management, International Workshop on Applied Probability (IWAP-2012), Jerusalem, Israel, June, 2012.
  17. Weintraub E., Cohen Y.,  Business – IT divide problem pertaining to planning and budgeting activities, Proceedings of the 17th Industrial Engineering and Management Conference (IEM); Tel-Aviv, Israel; March 2012.
  18. Cohen Y.,  Faccio M., The combined effect of multiple models sequencing and  absenteeism/turnover on the throughput of assembly lines, Proceedings of the 17th Industrial Engineering and Management Conference (IEM); Tel-Aviv, Israel; March 2012.
  19. Golan M., Singer G., Goren-Bar D., Cohen Y., Using manual assembly instructions to generate standard times, Proceedings of the 17th Industrial Engineering and Management Conference (IEM); Tel-Aviv, Israel; March 2012.
  20. Cohen Y, Goren-Bar D., Golan M.; New automated assembly model based on  automated route card scheme, Proceedings of the 5th Israeli Industrial Engineering Research Meeting (IIERM); Dead-Sea Resort, Israel; March 2011.
  21. Cohen Y., Keren B., New modeling framework for  project risk analysis
    with stochastic risks, Proceedings of the International Symposium on Stochastic Models in Reliability Engineering, Life Sciences  and Operations Research (SMRLO), Beer-Sheva, February 2010.
  22. Gurevich G., ., Keren B., Cohen Y., The impact of bundling perishable products on retailer and producer total profit, Proceedings of the International Symposium on Stochastic Models in Reliability Engineering, Life Sciences  and Operations Research (SMRLO), Beer-Sheva, February 2010.

 

Publications

ist of Publications

 Peer reviewed papers

, J.; Amorim; M.; Melão, N.; Cohen, Y.; Costa, J. (2021) Counterintelligence Technologies: An Exploratory Case Study of Preliminary Credibility Assessment Screening System in the Afghan National Defense and Security Forces. Information (MDPI), 12, 122, 1-12. https://doi.org/10.3390/info12030122

Cohen, Y., Singer, G. (2021) A smart process controller framework for Industry 4.0 settings. Journal of Intelligent Manufacturing (JIMS), 1-21. https://doi.org/10.1007/s10845-021-01748-5

  1. Cohen, Y., Shoval S., Faccio M. & Minto R.(2021)  Deploying cobots in collaborative systems: major considerations and productivity
  2. analysis, International Journal of Production Research, In Print

doi: doi.org/10.1080/00207543.2020.1870758

  1. Cohen, Y., Faccio, M., Pilati, F. (2019) Design and management of digital manufacturing and assembly systems in the Industry 4.0 era, International Journal of Advanced Manufacturing Technology (IJAMT), 105, 3565–3577 2019. https://doi.org/10.1007/s00170-019-04595-0
  2. Cohen, Y., Naseraldin, H., Chaudhuri, A., & Pilati, F. (2019). Assembly systems in Industry 4.0 era: a road map to understand Assembly 4.0. The International Journal of Advanced Manufacturing Technology(IJAMT),  105(9), 4037-4054. https://doi.org/10.1007/s00170-019-04203-1
  3. Maya Golan, Yuval Cohen & Gonen Singer (2020) A framework for operator –  workstation interaction in Industry 4.0, International Journal of Production Research, (IJPR),  58 (8), 2421-2432, DOI: 10.1080/00207543.2019.1639842
  4. Erel Avineri and Yuval Cohen, (2019). Optimal road project portfolio selection problem with local budget constraints, Journal of Business and Economic Management, 7(11): 369-375, November 2019, DOI: 10.15413/jbem.2019.0126, ISSN 2315-7755 ©2019 Academia Publishing. https://www.academiapublishing.org/journals/jbem/pdf/2019/Nov/Avineri%20and%20Cohen.pdf
  5. Cohen Y., Gelbard R., Amorim M. (2019) When to Stop? A New Stop Criterion for Combinatorial Optimization Search Techniques. 211-218.  In: Ortiz Á., Andrés Romano C., Poler R., García-Sabater JP. (eds) Engineering Digital Transformation. Lecture Notes in Management and Industrial Engineering. Springer, Cham, Print ISBN 978-3-319-96004-3, DOI https://doi.org/10.1007/978-3-319-96005-0_26
  6. Cohen Y., Rozenes S. ,Demand biorhythm estimation for setting service capacity, International Journal of Information Systems and Social Change, 9 (4), 2018, 30-44.
  7. Weintraub E., Cohen Y., Defining Network Exposure Metrics in Security Risk Scoring Models, International Journal of Advanced Computer Science and Applications (IJACSA), 9, (4), 2018, 399-404.
  8. Etgar, R., Gelbard, R., & Cohen, Y. (2018). Feature assignment in multi-release work plan: Accelerating optimization using gene clustering. Computers & Industrial Engineering(CAIE), 118, 123-137.
  9. Etgar R. Gelbard R. Cohen Y., Presenting the several-release-problem and its cluster based solution acceleration. International Journal of Production Research (IJPR), 2018, in press.
  10. Cohen Y., Rozenes S., Improving operational measures in a financial institute call center: a case study, Brazilian Journal of Operations & Production Management, 14, (2) 2018, 204-209.
  11. Etgar R., Gelbard R., Cohen Y. Optimizing Version Release Dates of Research and Development Long-Term Processes, European Journal of Operational Research (EJOR), 259(2), 2017, 642-653.
  12. Weintraub E., Cohen Y., Optimizing Cloud Computing Costs of Services for Consumers, In: Khosrow-Pour M., Encyclopedia of Information Science and Technology. 4th edition, 2017. 1627-1637.
  13. Cohen Y., Rozenes S., Optimizing Group Waiting Time in Service System with Learning Effect, International Journal of Business Analytics (IJBAN), 4 (1) 2017, 18-35.
  14. Weintraub E. and Yuval Cohen Y., Security Risk Assessment of Cloud Computing Services in a Networked Environment” International Journal of Advanced Computer Science and Applications (IJACSA), 7(11), 2016, 79-90.
  15. Ren, C., Barlotti, C., Cohen, Y., Frangipane, B., Garofalo, M., Cozzari, G., Metz, C. Re-layout of an assembly area: A case study at Bosch Rexroth Oil Control, (2015) Assembly Automation (AA), 35 (1), pp. 94-103.
  16. Weintraub E., Cohen Y., Optimizing User's utility from Cloud Computing Services in a Networked Environment, International Journal of Advanced Computer Science and Applications (IJACSA),. 6, (10), 2015, 153-163.
  17. Weintraub E., Cohen Y., Cost Optimization of Cloud Computing Services in a Networked Environment, International Journal of Advanced Computer Science and Applications (IJACSA),.  6 (4), 2015, 148-157.
  18. Faccio M., Cohen Y., "Editorial", Assembly Automation (AA), 35 (1), 2015. https://doi.org/10.1108/AA-10-2014-084
  19. Ren, C., Barlotti, C., Cohen, Y., Frangipane, B., Garofalo, M., Cozzari, G. and Metz, C.), "Re-layout of an assembly area: a case study at Bosch Rexroth Oil Control", Assembly Automation (AA), 35 (1), 2015.  94-103. https://doi.org/10.1108/AA-06-2014-052
  20. Cohen Y., A Technique for Integrated Modelling of Manual and Automatic Assembly, Journal of Manufacturing Technology Management (JMTM), 24 (3), 2015, 164-181.
  21. Gurevich G., Cohen Y., Keren B., Optimizing bundling policy of single-period products: perspectives of producers and retailers, International Journal of Operations Research and Information Systems (IJORIS), 5 (4), 2014, 1-25.
  22. Shavit T., Benzion U., Cohen Y., Behavioral decision making in the (Q,R) purchasing model: An experimental study, Managerial and Decision Economics, 35 (5) 2014, 357–370.
  23. Singer G., Golan M., Cohen Y., From product documentation to a ‘method prototype’ and standard times: a new technique for complex manual assembly, International Journal of Production Research (IJPR), 52 (2), 2014, 507-520.
  24. Apartsin Y., MaymonY., CohenY., Singer G., Nationality and Risk Attitude : Testing Differences and Similarities of Investors’ Behavior in Selected Financial Markets, Global Finance Journal (GFJ), 24 (2), 2013, 114-118.
  25. Bukchin Y., Cohen Y., Minimizing throughput loss in assembly lines due to absenteeism and turnover via work-sharing, International Journal of Production Research (IJPR), 51 (20), 2013, 6140–6151
  26. Cohen Y., Ornoy H., and Keren B., MBTI Personality Types of Project Managers and their Success: A Field Survey, Project Management Journal (PMJ), 44, (3), 2013, 78-87.
  27. Cohen Y., Assembly line segmentation: determining the number of stations per section, Journal of Manufacturing Technology Management (JMTM), 24 (3), 2013, 397 – 412.
  28. Cohen Y., Absenteeism as a Major Cause of Bottlenecks in Assembly Lines, International Journal of Production Research (IJPR), 50 (21), 2012, 6072-6080.
  29. Cohen Y., Sadeh A., Zwikael O., Finding the Shortest Non-Delay Schedule for a Resource-Constrained Project, International Journal of Operations Research and Information Systems (IJORIS), 3 (4), 2012, 41-58
  30. Weintraub E., and Cohen Y.; Business IT divide problem pertaining to planning and budgeting activities, Advances in Computer Science and Engineering, 8 (2), 2012, 85-109.
  31. Keren B., and Cohen Y.; Optimising Project Performance: The Triangular Trade-off Optimisation Approach, International Journal of Engineering Management and Economics (IJEME), 3 (1), 2012, 152-170.
  32. Cohen Y., Zwikael O., and Sadeh A.; Using a sliding-frame approach for scheduling large and complex IT projects, International Journal of Information Technology Project Management (IJITPM), 2 (4), 2011, 1-13.
  33. Cohen Y., A New Modeling and Implementation Technique for Agent-Based Discrete Industrial Automation, Journal of Communication and Computer; 8 (1); 2011, 1-7.
  34. Cohen Y., Zwikael O., A New Technique for Estimating the Distribution of a Stochastic Project Makespan, International Journal of Information Technology Project Management (IJITPM), 1(3), July-September 2010, 14-27.
  35. Benzion U., Cohen Y., Shavit T., The newsvendor problem with unknown distribution, Journal of Operational Research Society (JORS), 61; 2010; 1022-1031.
  36. Cohen Y., Mining the successful binary combinations: Methodology and a simple case study, International Journal of Computer Science Issues (IJCSI), 7(1), 2010; 1-9.
  37. Cohen Y., and Dar-El E.; The sliding frame - extending the concept to various assembly line balancing problems, International Journal of Manufacturing Technology and Management (IJMTM); 20 (1/2/3/4); 2010; 4-24.
  38. Cohen Y., Wang M. E., and Bidanda B.; Automatic translation of process level Petri-net to a ladder diagram, Journal of Communication and Computer; 6 (11); 2009, 58-64.
  39. Cohen Y., and Keren B.; Trailer to door assignment in a synchronous cross-dock operation, International Journal of Logistics Systems and Management (IJLSM); 5, (5); 2009; 574-590.
  40. Cohen Y. and Zwikael O.; Modelling and Scheduling Projects Using Petri Networks; International Journal of Project Organization and Management (IJPOM); 1 (2); 2009; 221-233.
  41. Prakash, A., Khilwani, N., Tiwari, M.K., Cohen, Y.; Modified immune algorithm for job selection and operation allocation problem in flexible manufacturing systems, Advances in Engineering Software, 39 (3), 2008, 219 – 232.
  42. Benzion U., Cohen Y., Peled R., and Shavit T.; Decision-making and the newsvendor problem: an experimental study, Journal of the Operational Research Society (JORS); 59 (9); 2008; 1281-1287.
  43. Cohen Y., Dar-El E., Vitner G., and Sarin S.; Optimal layout and work allocation in batch Assembly under learning effect, International Journal for Intelligent Systems Technologies and Applications (IJISTA); 4 (1-2); 2008; 188-207.
  44. Cohen Y., Dar-El E., Vitner G., and Sarin S.; Work allocation to stations in a line with unlimited buffers for three general learning patterns, International Journal for Intelligent  Systems Technologies and Applications (IJISTA); 4 (1-2); 2008; 123-140.
  45. Cohen Y., Vitner G., and Sarin S.; Work allocation to stations with varying learning slopes and without buffers, European Journal of Operational Research (EJOR); 184 (2); (January 2008); 797-801.
  46. Cohen Y., Sadeh A., and Ben-David A.; A new approach for decision rule extraction from binary data, Journal of Engineering, Computing and Architecture (ISSN 1934-7197); 1(2); 2007; 1-10.
  47. Cohen Y., and Sadeh A.; A new approach for constructing and generating AOA networks, Journal of Engineering, Computing and Architecture (ISSN 1934-7197); 1 (1); 2006; 1-15.
  48. Zwikael O., Cohen Y., And Sadeh A.; Non-Delay scheduling as a managerial approach for managing projects, International Journal of Project Management (IJPM); 24; 2006; 330-336.
  49. Cohen Y., Vitner G., and Sarin S.; Optimal allocation of work in assembly lines for lots with homogeneous learning, European Journal of Operational Research (EJOR), Special issue on line balancing; 168 (3); 2006; 922-931.
  50. Cohen Y. and Dar-El E. M.; Optimizing the number of stations in assembly lines under learning, Production Planning and Control; 9 (3); 1998; 230-240.
  51. Cohen Y., Bidanda B., and Billo E. R.; Accelerating the generation of work-measurement standards through automatic speech recognition: A laboratory study, International Journal of Production Research (IJPR); 36 (10); 1998; 2701-2715.
  52. Billo E. R., Bidanda B., Cohen Y., Fei C., and Petri K.; Performance standards and testing of two-dimensional bar-code systems for overhead scanning, Journal of Manufacturing Systems (JOMS); 15 (5); 1996; 305-315.

 

 

  1.  Books
  1. Shtub A., Cohen Y., (2016) Introduction to Industrial Engineering, Second Edition, CRC Press, (in English, ISBN 9781498706018). BOOK OF THE YEAR AWARD by the Institute for Industrial and systems Engineering (IISE).
  2. Rozenes S., Cohen Y., (editors), (2017) Handbook of Research on Strategic Alliances and Value Co-Creation in the Service Industry, Harrisburg: PA, IGI Global. (in English, ISBN-13: 978-1522520849).
  3. Shtub A., Cohen Y., (2014) Project Management for Industrial Engineering Students (revised edition), The Open University of Israel, (in Hebrew, two volumes).
  4. Shtub A., Cohen Y., (2014) Introduction to Industrial Engineering, (First Edition), The Open University of Israel, (in Hebrew).
  5. Cohen Y. (2012) Probability and Stochastic Models in Operations Research, The Open University of Israel, ISBN: 978-965-06-1365-5 (in Hebrew: 474 pages).
  6. Shtub A., Cohen Y., Keren B., (2008) Project Management for Industrial Engineering Students, The Open University of Israel, ISBN: 978-965-06-0963-4 (in Hebrew: 612 pages).

 

Book Professional and scientific editor for the translation to Hebrew of the two volumes of "Production and Operations Analysis". The translation is the basis of two courses in the Open University:

  1. Nahmias S. (2008) Operations Management 1 (in Hebrew), The Open University of Israel, ISBN: 965-06-0712-9;
  2. Nahmias S. (2008) Operations Management 2 (in Hebrew), The Open University of Israel, ISBN: 965-06-0787-0.

 

  1. Book Chapters
  1. Reis J., Amorim M., Cohen Y., Rodrigues M. (2020) Artificial Intelligence in Service Delivery Systems: A Systematic Literature Review. In: Rocha Á., Adeli H., Reis L., Costanzo S., Orovic I., Moreira F. (eds) Trends and Innovations in Information Systems and Technologies. WorldCIST 2020. Advances in Intelligent Systems and Computing, vol 1159. Springer, Cham, pp  222-233.
  2. Reis J., Amorim M., Melão N., Cohen Y., Rodrigues M. (2020) Digitalization: A Literature Review and Research Agenda. In: Anisic Z., Lalic B., Gracanin D. (eds) Proceedings on 25th International Joint Conference on Industrial Engineering and Operations Management - IJCIEOM. IJCIEOM 2019. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Cham, pp 443-456. https://link.springer.com/chapter/10.1007%2F978-3-030-43616-2_47
  3. Cohen, Y., Gelbard, R., & Amorim, M. (2019). When to Stop? A New Stop Criterion for Combinatorial Optimization Search Techniques. In Engineering Digital Transformation (pp. 211-218). Springer, Cham. (https://link.springer.com/chapter/10.1007/978-3-319-96005-0_26)
  4. Weintraub, E., & Cohen, Y. (2018). Optimizing Cloud Computing Costs of Services for Consumers. In: Encyclopedia of Information Science and Technology, Fourth Edition (pp. 1627-1637). IGI Global. (https://www.igi-global.com/chapter/optimizing-cloud-computing-costs-of-services-for-consumers/217284)
  5. Cohen Y., Rozenes S., (2017).Value Co-Creation Approach for Improving Performance of Outsourced Projects, chapter 9, 172-183. In: Cohen Y., Rozenes S., (editors), Handbook of Research on Strategic Alliances and Value Co-Creation in the Service Industry, Harrisburg: PA, IGI Global..
  6. Cohen Y., Gonen S., Golan M., & Goren-Bar D., Chapter 8: Automating the transformation from a prototype to a method of assembly, Innovations and Advances in Computer Information Systems, Sciences, and Engineering, Part I, Springer, 2013, 99-106.
  7. Cohen, Y., Sadeh, A., & Zwikael, O. (2013). Scheduling Large and Complex IT Projects Using Sliding-Frame Approach. In Wang, J. (Ed.), Perspectives and Techniques for Improving Information Technology Project Management, IGI Global Chapter 12, 173-185.

DOI: https://www.igi-global.com/gateway/chapter/73234

  1. Cohen Y., & Goren-Bar D., New Automated Assembly Model Based on Automated Route Card Scheme, in: Elleithy K., Sobh T., Emerging Trends in Computing, Informatics, Systems Science and Engineering, Springer 2013, 95-102.
  2. Cohen Y., & Zwikael O.; A New Technique for Estimating the Distribution of a Stochastic Project Makespan, in Wang J., Project Management Techniques and Innovations in Information Technology, IGI Global, 33-47, 2012.
  3. Cohen Y., Wang M., and Bidanda B.; Transition Network for Automation Modeling: A Case Study, in: Elleithy K., Sobh T., Iskander M. Kapila V. Karim M., Mahmood A. (editors), Technological Developments in Networking, Education and Automation; Springer; 2010; 187-192.
  4. Cohen Y., Wang M., and Bidanda B.; Automatic translation of a process level Petri-net to a ladder-diagram, in: Sobh T., Elleithy K., Mahmood A., Karim M. (editors), Advanced Techniques in computing Sciences and Software Engineering; Springer; 2010; 25-31.
  5. Cohen Y.; A modeling technique for execution and simulation of discrete automation, , in: Sobh T., Elleithy K., Mahmood A., Karim M. (editors), Novel algorithms and techniques in telecommunications, automation and industrial electronics; Springer; 2008; 273-278.
  6. Cohen Y., Wang M., and Bidanda B.; Modeling and implementation of agent-based discrete industrial automation, in: Sobh T., Elleithy K., Mahmood A., Karim M. (editors), Innovative algorithms and techniques in automation, industrial electronics and telecommunications; Springer; 2007; 535-541.

 

Tel Aviv University makes every effort to respect copyright. If you own copyright to the content contained here and / or the use of such content is in your opinion infringing, Contact us as soon as possible >>
Tel Aviv University, P.O. Box 39040, Tel Aviv 6997801, Israel
UI/UX Basch_Interactive